First I will write a brief introduction about me:
My name is Raphael Nunes, I’m student of Computer Engineering at Federal University of São Carlos (UFSCar). Currently I am working with SYS administration at SimuCAD (Department of Production Engineering - UFSCar) and I’m participating on Google Summer of Code 2007 working on a GNOME Project.
In this first post I would like to announce the first release of the software that I ‘m developing in the Google Summer of Code 2007 (GSoC). To whom don’t know GSoC enter in the page http://code.google.com/soc. The software is gnome-voice-control and is being developed to Gnome Foundation. The project application that I submitted to GSoC can be found at http://code.google.com/soc/gnome/appinfo.html?csaid=4F64D394968BB092.
The gnome-voice-control is an applet software developed to control the GNOME Desktop by voice.
The gnome-voice-control can be downloaded from http://www.comp.ufscar.br/~raphael18/gnome-voice-control-0.1.tar.gz
To install gnome-voice-control:
First download sphinx2 that is a speech decoder developed by Carnegie Mellon University.
wget http://cmusphinx.org/download/nightly/sphinx2.nightly.tar.gz
Extract
tar -xvvzf sphinx2.nightly.tar.gz
Enter in the sphinx folder
cd sphinx2
Install the sphinx with the commands as root
./configure –prefix=/usr
make
make install
Exit the sphinx2 folder
cd ..
Once sphinx2 installed, download gnome-voice-control
wget www.comp.ufscar.br/~raphael18/gnome-voice-control-0.1.tar.gz
Extract
tar -xvvzf gnome-voice-control-0.1.tar.gz
Enter in gnome-voice-control folder
cd gnome-voice-control-0.1
To install gnome-voice-control execute the following commands as root
./configure –prefix=/usr –with-sphinx2=/usr
make
make install
Now, the gnome-voice-control is installed.
Add the gnome-voice-control to gnome-panel
Click with the right button at the panel and choose add to panel, then will appear a window to choose applets. In the Micellaneous section has an applet with name VoiceControl, add it.
After all, you will see an applet with a text ‘idle’. To make the gnome-voice-control function, click with the right button on the applet and choose start control. When the applet show the text ‘ready’ you can start to speech.
To make the gnome-voice-control stop, click with the right button on the applet and choose stop control.
I hope that you like the software.
The actions implemented in this first release are:
RUN TERMINAL : Open gnome-terminal
RUN MAIL : Open Evolution
RUN BROWSER : Open Epiphany
MINIMIZE WINDOW
MAXIMIZE WINDOW
CLOSE WINDOW
NEXT WINDOW
Comments about the software are appreciated.
Thanks,
Raphael Nunes
good luck
first comment =D
I saw it working, really nice!!
“Run the fucking terminal” worked like a charm LOL.
[]’s Pacu
Hey! I liked it very much!
The only problem is that when the applet is active and I’m talking to other people, it sometimes thinks I’m sending it controls, but I’m not. It happened few times though.
Very nice
I can’t get it to configure properly on Ubuntu 7.04. Has any of you achieved it ?
hello.
sorry, i’m a newbie. i’m also using ubuntu 7.04 (64bit version).
I succesfully installed sphinx2 (I also made a deb by using checkinstall).
on the contrary, I can’t configure because of this error
checking for GNOME_PANEL... configure: error: Package requirements (libpanelapplet-2.0 gtk+-2.0 libgnomeui-2.0 gstreamer-0.10 gstreamer-base-0.10 gdk-2.0 libwnck-1.0) were not met:
but I can see from synaptic that libpanelapplet-2.0 (for example) is correctly installed in /usr/lib, but there is a - instead of the . between 2 and 0: the packet is: libpanelapplet2-0
moreover, do you need any help with anything an italian electronic engineer with some spare free time and some little programming experience can be good at?
the libpanelapplet-2.0 contains the panel binaries
to compile a app that uses it as a requirement, you need the development files, which are included in the packages which names end with -dev
thank you, I’m going to try as soon as possible. btw, I thought that having build-essential was more than enough…I was wrong! thank you for the support
thanks! now it’s working.
the problem is now that the thing is stuck in “calibration” mode and I can’t do nothing! why??
Hi to all,
About the problem on Ubuntu Festy, I think that is a problem on audio capture.
I am trying to discover what is the problem, when I find the solution to the problem I will divulge.
Thanks,
Raphael Nunes
[...] « GNOME-VOICE-CONTROL 0.1 RELEASE GSoC [...]
I am having the same exact problem as bastianazzo. It gets stuck at “Calibration”.
Running Ubuntu 7.04 AMD64 Desktop
Resolving http://www.comp.ufscar.br... failed: Temporary failure in name resolution.What can i do?
On my side, Ubuntu Feisty doesn’t seem to like:
./configure –prefix=/usr –with-sphinx2=/usr
returns: “configure: error: invalid variable name: –prefix”
./configure –prefix=/usr
returns a similar error
You must replace – by –
– by - and then - (that is a double one, WordPress eats the formatting)
I’m getting the following errors while trying to compile gnome-voice -controler (I’m getting some for Sphinx
http://linux.a.sciences.po.googlepages.com/errors
I couldn’t paste it all because the terminal displays only a limited number of errors.
NOTE: I’ve carefully added the required packages on Ubuntu 7.04, used the double - thing.
Has anyone a clue?
[...] Questo è il sito del programmatore di questo progett, con i sorgenti e le istruzioni per compilarlo. [...]
when i say
run browse
Avvio fallito a causa del seguente errore:
Failed to connect to socket /tmp/dbus-KWe5Drk9Pa: Connessione rifiutata
[...] Information on instalation can be found here: [...]
[...] dimenticavo, su GNOME Live trovate un rilascio del software, e qui trovate le istruzioni per [...]
[...] Guida [...]
feisty 64 bit. i’m stuck at calibration.
keep going
Hi, congrats for the good job!
I’m using feisty and your soft (v0.2) without any problem at all!
It’s great and fun to use
Btw could you please show how to add more commands and change the existent ones so I could have firefox instead of ephiphany (for example) and could also try to make an italian localization? I know this is still a dev release but since it works so well…
And one last question: the only “problem” that since now I can recognise with the app is that the feedback is not so fast (not a big problem really)…but I was wandering to know if the new releases will be oriented in this direction
Thanks,
Marco
i’m still stuck :> any response?
Muito bom. Deu trabalho pra instalar no ubuntu feisty, mas ta funfando blz…
Run terminal é mto útil msm… Parabéns
Muito bom. Deu trabalho pra instalar no ubuntu feisty, mas ta funfando blz…
Run terminal é mto útil msm… Parabéns
I seem to be having a problem with 7.04 I have done all of the different suggestions that are on here but for some reason my install doesn’t have the C Compiler as the error shows.
checking for C compiler default output file name… configure: error: C compiler cannot create executables
See `config.log’ for more details.
I have no idea what is going on here but is there any suggestions???
Lemer
Do you have gcc and g++ installed?
Thanks,
Raphael Nunes
check this thread, it is nice howto/info for debian etch:
http://www.linuxquestions.org/questions/linux-software-2/voice-recognition-562944/#post2956591
Hello,
when you add support for keyboard keys?
I’d need voice control of my TV
Thanks
[...] Guida [...]
Ahhhhhhhhh! The program hangs at ‘Calibration’. Its quite frustrating. Any help would be super awesome.
Works great, keep up the good work.
Amazing ! This is one more giant step for open source. Keep up the good work.
[...] dimenticavo, su GNOME Live trovate un rilascio del software, e qui trovate le istruzioni per [...]
How to install ….
Go to SYSTEM>ADMINISTRATION>SYNAPTIC
and than search for GNOME-VOICE-CONTROL
select the box that appear and install,
after that rightclick on gnome bar and “ADD TO PANEL”
than you find the voice control and drag to the panel =P
I think the “Calibration” hanging that seems to be happening to a lot of people including myself may be a results of the audio input device. I am using a dell XPS m1210 laptop with 64 hardy. I have my web cam and mic working great with skype, but I had to change my audo input device to “USB– blah blah…”. I do not know how to change the configuration for the audio input device, I imagine it is in the Sphynx configurations since the gnome voice control uses that. So I think once you have Sphynx working correctly with the right audio input device then it should go from Calibration to ready. I will try that
some of the voice commands work for me in your second release, but a lot of them don’t. “Next Window” does not work at all. How can i train mine to recognize my voice a bit better? I’d also like to add features to it, maybe in the future i will release changes i make so everyone else can benefit. I think this project shows a lot of potential!
In your latest version 0.3 tar file you request install of pocketsphinx
In your description above it s just sphinx.
Please explain the difference if any.
On Ubuntu Hardy I get these missing packages
checking pkg-config is at least version 0.9.0… yes
checking for GNOME_PANEL… configure: error: Package requirements (libpanelapplet-2.0 gtk+-2.0 libgnomeui-2.0 gstreamer-0.10 gstreamer-base-0.10 gdk-2.0 libwnck-1.0) were not met:
No package ‘libpanelapplet-2.0′ found
No package ‘gtk+-2.0′ found
No package ‘libgnomeui-2.0′ found
No package ‘gstreamer-0.10′ found
No package ‘gstreamer-base-0.10′ found
No package ‘gdk-2.0′ found
No package ‘libwnck-1.0′ found
They do not seem to exist in ubuntu..
Hi, I also get the message “Calibrations” when I am trying to use the program. It is stuck here and so I cannot use the program. I know my microphone works as I have tried it in “Sound Recorder” after changing the default “Record from input” from “Aux” to “Line-in”. Is there anyway to change the default options in this program so it will detect my microphone?
I’m using:
Hardy Heron 64 - desktop edition.
Cheers!